Nikon Mounts


     Nikon made Rangefinder 35mm cameras that were copies of Contax designs.   Therefore, those cameras used Contax mount lenses.  

The F Mount

     In 1957 Nikon decided to produce 35mm slr cameras in order to have a system which could easily support long telephoto lenses.   They modified the Contax rangefinder design and came up with the Nikon F.    The mount it used was called the Nikon F Mount.    That basic F Mount design is still being used today in Nikon's D-SLR's.    Nikon F cameras, and Nikkormats as well, used meters that were linked to the aperture setting on the lens by a pin which connected to the lens by way of a little prong.  In order for the meter to know which f stop was being used, the user needed to mount the lens at f5.6 then turn the aperture ring to its smallest setting, then back to its largest setting.   This was called the Nikon swing.   The meter knew the aperture setting by the position of the pin.   These lenses are called Non-Ai.    They will not mount on camera bodies made for Ai lenses or newer.  

Nikon F (Non Ai)

Ai Mount

     In 1977 Nikon modified the F Mount.   It was no longer necessary to do the 'Nikon Swing' in order for the camera's meter to know what the aperture setting was.  There was now a notch cut into the base of the lens which would meet with a lever on the camera body that was connected to the meter.  It was no longer necessary to catch a pin with the lens fork anymore.   They called this advancement Aperture Indexing or Ai.    Nikon left the fork on the lens in case users wanted to mount the new style Ai lenses on their Nikon F bodies.   They modified the forks by cutting holes to allow light to hit the base of lens.  This made viewing a second set of aperture numbers much easier.   

Nikon Ai

Ai-S Mounts

     In 1981, Nikon modified the mount again.  With an Ai-S lens atteched, the camera could control the aperture by itself.   This made shutter priority and program exposure possible.    Ai-S mounts have a thinner collar surounding the rear lens element.   Ai-s lenses have their highest aperture number colored orange.   There is also a notch cut into the mount which tells Ai-S capable cameras that it's an Ai-S lens.   In 1983 Nikon made a modification which allowed camera and lens to communicate with a CPU.  

Nikon AiS

Nikkor AF

     Also, in 1983, Nikon introduced autofocus on the F3 AF.    They had been working on an autofocus lens since 1971.   With the FS AF they introduced two lenses that had internal motors.    In 1986 they decided to mass produce autofocus cameras.  They introduced the N2020 which used the Nikkor AF mount.    These lenses do not have internal motors.  The motors are located in the camera bodies.  A small screw head at the base of the lens is turned by the camera motor, and this screw head turns the focus ring.    Nikkor Af lenses will mount on earlier manual focus camera bodies but will not Autofocus.   On early F mount cameras you will need to use stop down metering because the lens does not have a prong.  You may add a prong if you so desire.

Nikon AF 2.jpg

Nikkor AF

Nikkor AF-D

     In 1996, the CPU in AF lenses was modified to relay focus distance infornation to the cameras metering system.  This was primarlily done to improve flash exposure.   The mount did not change externally, except for the use of plastics.  Look for the 'D' written after the lens designation.


Nikkor AF

Nikkor AF-G

     In 2000, Nikon did away with the aperture ring on autofocus lenses.   These were 'G' lenses.   Since they do not have an aperture ring they can not be used on Nikon cameras without a CPU.   Look for the 'G' after the lens designation.  

Nikkor AF-I & AF-S

     These lenses have internal motors.   There is no screw drive in the lens mount.   They are also 'G' lenses because they don't have an aperture ring.   Look for the AF-S on the lens designation.


Nikkor AF-S 'G'


     The DX mount is a modified F mount which fits Nikon sub frame Digital slr's.    It is basically a smaller AF-S mount.   

Nikon AF-s.jpeg


Other Nikon Mounts

Nikonos and Nikon RS

     Nikonos cameras were based on Calypso cameras.  Nikon bought the rights to the design and produced the Nikonos I.   It was a manual focus underwater camera.   In 1992, Nikon introduced the RS.  The RS used a variant of the F mount.   They added an outer bayonet ring for waterproofing purposes.  It was an autofocus underwater camera.   





Nikon 1

     Introduced in 2011, this mount is used on Nikon CX format mirrorless camera bodies.   


Nikon 1 Mirrorless

Nikon Pronea

     I'm sure Nikon would like to forget that APS cameras were ever made but I won't forget.   APS cameras were an attempt to broaden the market by getting you to buy a new camera system.  Nikon, Fuji, Minolta and Kodak got together and created the system.   Each company contributed to the cause.   Nikon, Minolta and Kodak made cameras and Fuji made minilab modifications.   As a salesman I begged my customers not to buy an APS camera.    Nikon made Pronea cameras for the APS system.  They developed a new lens mount for it.  Here it is.  


Nikon IX Pronea

© Robert Allen Kautz